Academic Journal
Q3Annals of 3D Printed Medicine
About Annals of 3D Printed Medicine
Annals of 3D Printed Medicine is a scholarly journal published by Elsevier Masson s.r.l.. SCImago 2025 lists it in Q3, with an SJR of 0.558 and H-index of 21.
Coverage: 2021-2026. Research categories: Biomedical Engineering (Q3); Health Informatics (Q3).
Open-access policies and author information
Reported in the official DOAJ public CSV snapshot (2026-09-01), downloaded 2026-10-03. Record updated 2026-04-27. This snapshot does not establish today’s listing status or fee quotation.
Publisher policy links recorded by DOAJ
- Aims and scope ↗
- Editorial board ↗
- Instructions for authors ↗
- Peer-review policy ↗
- Publication fees ↗
- Fee waivers ↗
- Licence terms ↗
- Copyright policy ↗
- Preservation policy ↗
Source: DOAJ journal record. Journal metadata is distributed by DOAJ under CC0. Confirm current fees, tax, eligibility and waiver terms with the publisher.
Source-backed journal facts
Topics in published research
Anatomy and Medical Technology; Additive Manufacturing and 3D Printing Technologies; 3D Printing in Biomedical Research; Surgical Simulation and Training; Diverse Scientific and Economic Studies; Human auditory perception and evaluation.
OpenAlex classifies topics from published works. These topics are not the publisher’s official aims and scope.
Source: OpenAlex source record. Retrieved 2026-10-03. Source record updated 2026-10-02. OpenAlex metrics are different from SCImago metrics and the Clarivate Journal Impact Factor.
Journal Metrics
Quartile, SJR and the listed SCImago H-index use the 2025 imported SCImago dataset. A quartile may vary by subject category. Values without a source or reporting year are unverified historical entries. Verify the current Journal Impact Factor with Clarivate or the publisher before using it.
Aims & Scope
The publisher’s official aims and scope have not yet been verified for this profile. Use the journal website to check subject fit and accepted article types before submitting.
Recent Research Articles
Latest publications matched automatically by ISSN.
A novel patient-specific guide with radiopaque alignment for minimally invasive sacroiliac joint fusion without bone seating: A case series
Nick Kampkuiper, Maaike Koenrades, Gabriëlle Tuijthof, Edsko Hekman et al.
2026-11 · DOI: 10.1016/j.stlm.2026.100236Editorial Board
2026-08 · DOI: 10.1016/s2666-9641(26)00014-7Contents
2026-08 · DOI: 10.1016/s2666-9641(26)00015-9Impact of MRI integration in CT-based planning on the accuracy of patient-specific 3D-printed shelf implant placement: a comparative cadaveric study
Milou FT Hüsken, Joëll Magré, Koen Willemsen, Harrie Weinans et al.
2026-08 · DOI: 10.1016/j.stlm.2026.100237Chevron versus transverse osteotomies in intercalary reconstructions – Lessons learned from cadaveric biomechanical study about mechanical stability and biological implications
H․Chien Nguyen, Whitney L. Kenswiel, Michiel A.J. van de Sande, David D. Krijgh et al.
2026-08 · DOI: 10.1016/j.stlm.2026.100238Low-cost 3D-printed surgical guide for orbital floor reconstruction
Varun Gopal, Rand Kittani, Kyung Seol, David Cartier et al.
2026-05 · DOI: 10.1016/j.stlm.2026.100235Advancements in rodent microsurgery: A novel 3d-printed microsurgery table with integrated heating pad, anesthesia delivery, and magnetic surgical instrument compatibility
Rishith R. Mereddy, Eric Ouyang, Weifeng Zeng, Aaron M. Dingle et al.
2026-05 · DOI: 10.1016/j.stlm.2026.100234An evaluation of 3D printed VAT polymerised soft materials and structures for breast prosthesis
Lyons EmmaJude, Baban Chwanrow, Walsh Lorraine, O’Sullivan Aidan et al.
2026-05 · DOI: 10.1016/j.stlm.2026.100229Editorial Board
2026-05 · DOI: 10.1016/s2666-9641(26)00006-8Manual delineation for the development of anatomically realistic 3D-printed MRI phantoms of complex anatomy: A technical note
Habeeb Yusuff, Thibault Willaume, Samuel Guigo, David Semeril et al.
2026-05 · DOI: 10.1016/j.stlm.2026.100230Contents
2026-05 · DOI: 10.1016/s2666-9641(26)00007-xOptical and Mechanical Optimization of 3D-Printed Anatomical Models for Medical Education
Adam S. Verga, Kuang-Drew Li, Benjamin Budenstein, Ailey G. Fogel-Bublick et al.
2026-02 · DOI: 10.1016/j.stlm.2025.100224Editorial Board
2026-02 · DOI: 10.1016/s2666-9641(26)00001-9Patient-specific guides for minimally invasive sacroiliac joint fusion revision surgery
Danique Smelt, Nick Kampkuiper, Jorm Nellensteijn, Maranda Haenen et al.
2026-02 · DOI: 10.1016/j.stlm.2025.100225Contents
2026-02 · DOI: 10.1016/s2666-9641(26)00002-0Evaluation of patient preference in 3D printed cast and associated cost compared to current standard of care
Rand Kittani, Alexis Watson, Sydni Silverman, Kaviamuthan Kanakaraju et al.
2026-02 · DOI: 10.1016/j.stlm.2025.100223Contents
2025-11 · DOI: 10.1016/s2666-9641(25)00037-2Development of a 3D-printed Finger Splint Immobilizer for comfortable treatment of Proximal Interphalangeal Joint Injuries
Muhammad Ikhwan Nugraha, Waleed K. Ahmed, Agung Shamsuddin Saragih
2025-11 · DOI: 10.1016/j.stlm.2025.100193Next-gen heart solutions: 3D bioprinting and AI in valve replacement therapy
Saddik Haddad, Ahmad․Amr Karzoun, Lutfallah Raffoul, Yazan Mohamed et al.
2025-11 · DOI: 10.1016/j.stlm.2025.100219Editorial Board
2025-11 · DOI: 10.1016/s2666-9641(25)00036-0Reviews
Community Reviews
Version History
October 2, 2026 at 9:19 pm
October 2, 2026