Academic Journal
Q2Advanced Engineering Letters
About Advanced Engineering Letters
Advanced Engineering Letters is a scholarly journal published by The Association of Intellectuals for the Development of Science in Serbia The Serbian Academic Center" Novi Sad". SCImago 2025 lists it in Q2, with an SJR of 0.437 and H-index of 10.
Coverage: 2022-2025. Research categories: Industrial and Manufacturing Engineering (Q2); Mechanical Engineering (Q2); Energy Engineering and Power Technology (Q3); Materials Science (miscellaneous) (Q3).
Source-backed journal facts
Topics in published research
Engineering Technology and Methodologies; Additive Manufacturing and 3D Printing Technologies; Engineering Diagnostics and Reliability; Advanced ceramic materials synthesis; Additive Manufacturing Materials and Processes; Aluminum Alloys Composites Properties.
OpenAlex classifies topics from published works. These topics are not the publisher’s official aims and scope.
Source: OpenAlex source record. Retrieved 2026-10-03. Source record updated 2026-10-01. OpenAlex metrics are different from SCImago metrics and the Clarivate Journal Impact Factor.
Journal Metrics
Quartile, SJR and the listed SCImago H-index use the 2025 imported SCImago dataset. A quartile may vary by subject category. Values without a source or reporting year are unverified historical entries. Verify the current Journal Impact Factor with Clarivate or the publisher before using it.
Aims & Scope
The publisher’s official aims and scope have not yet been verified for this profile. Use the journal website to check subject fit and accepted article types before submitting.
Recent Research Articles
Latest publications matched automatically by ISSN.
Study on the Bauschinger Effect of Extruded Magnesium AZ31B During the Low-Cycle Fatigue Test of a Bone Implant Material Candidate
Irza Sukmana, Ahmad Yudi E. Risano, Mohammad Badaruddin, Zulhanif et al.
2026-09-30 · DOI: 10.46793/adeletters.2026.5.3.2Comparative Assessment of Differential Evolution-Based and Analytical Parameter Extraction for Single-Diode PV Models Using Measured Data
Damir Blažević, Tomislav Keser, Andrej Horvat, Damir Nožica et al.
2026-09-30 · DOI: 10.46793/adeletters.2026.5.3.1Tensile Testing and Fracture Behaviour of 17-4 PH Stainless Steel Produced by Atomic Diffusion Additive Manufacturing Using a Modified Specimen Geometry
Peter Spuro, Andrej Czan, Mario Drbul, Marek Roszak et al.
2026-09-30 · DOI: 10.46793/adeletters.2026.5.3.5Valorization of Olive Kernel Shell Waste as Partial Aggregate Replacement in Self-Compacting Concrete
Nahla Hilal, Haneen Mohammad Abdel Jabar, Mohammad I. AlBiajawi, Aseel H. A. Abdaljader et al.
2026-09-30 · DOI: 10.46793/adeletters.2026.5.3.4Evaluation of the Mechanical and Corrosion Resistance of Magnesium Alloys in a Simulated Human Body Environment
Melisa Šnircová, Peter Palček, Martin Slezák, Milan Uhríčik et al.
2026-09-30 · DOI: 10.46793/adeletters.2026.5.3.3Using Digital Twins of Bearing Units for Their Automatic Diagnostics
Mikhail Erokhin, Alexander Pastukhov, Evgeny Timashov
2026-06-22 · DOI: 10.46793/adeletters.2026.5.2.5Effects of Structure Vibrations and Noise on Passenger Bus Seat Ride Comfort
Hai Quan Vu, Duc Hai Nguyen, Anh Ngoc Nguyen, Kirill Evgenievich Karpukhin et al.
2026-06-22 · DOI: 10.46793/adeletters.2026.5.2.2Artificial Intelligence-Optimized Hybrid Hydrogen–Battery Energy Storage for Renewable Microgrids
Johnson Abiola, Humbulani Simon Phuluwa, David Aborisade, Muniru Okelola et al.
2026-06-22 · DOI: 10.46793/adeletters.2026.5.2.1Mechanical Performance of Mortars with Biomass Ash
Josip Radić, Antonija Ereš, Ana Hlebec, Ivanka Netinger Grubeša et al.
2026-06-22 · DOI: 10.46793/adeletters.2026.5.2.3Influence of Welding Thermal Cycles on Fatigue Fracture Behaviour of High-Strength Austenitic Steel
Filip Klejch, Eva Schmidova, Arman Dadkhah
2026-06-22 · DOI: 10.46793/adeletters.2026.5.2.4Contact Interaction Analysis of a Sliding Bearing Sleeve with Friction and Separation Zones in an Elastic Layer
Vitaly Miroshnikov, Serhii Sverdlov, Olexii Ilyin, Mykhailo Kosenko et al.
2026-03-31 · DOI: 10.46793/adeletters.2026.5.1.3Experimental Investigation on Electric Vehicle Braking System Using Machine Learning for Enhanced Performance and Safety
Lalit N. Patil, Gulab D. Siraskar, Dipak S. Patil, Nikhil Shinde et al.
2026-03-31 · DOI: 10.46793/adeletters.2026.5.1.4Electric Propulsion Systems of Autonomous Hydrogen Fuel Cell Buses
Saša Milojević, Slobodan Savić, Aleksandar Ašonja, Slavica Miladinović et al.
2026-03-31 · DOI: 10.46793/adeletters.2026.5.1.5Fused Deposition Modelling in Additive Manufacturing: A Comprehensive Review of Polymer-Based Processes, Properties, and Applications
S. Gopalakrishnan, N. Senthilkumar, B. Deepanraj, Muhammad Asad et al.
2026-03-31 · DOI: 10.46793/adeletters.2026.5.1.2A Machine Learning Approach for Bearing Fault Identification Using IFWHT, GLCM, and Feature Ranking
Vipul Dave, Pradeep Kumar Karsh, Umangbhai Soni, Vipul M Dabhi et al.
2026-03-31 · DOI: 10.46793/adeletters.2026.5.1.1Optimization of brake disc for improved thermal and structural behavior using thermo-mechanical analysis
Manoj Subhash Patil, Harshal Ashok Chavan
2025-01-01 · DOI: 10.46793/adeletters.2025.4.4.3Investigation of kerf taper angle and surface roughness in abrasive water jet machined glass fiber-reinforced polyester composites
Karthick Rasu, Joao Paulo Davim, Ramesh Marimuthu, Vigneshkumar Murugesan et al.
2025-01-01 · DOI: 10.46793/adeletters.2025.4.4.1OPTIMIZATION OF POLYMER STAKE GEOMETRY BY FEA TO ENHANCE THE RETENTION FORCE OF AUTOMOTIVE DOOR PANELS
Rubén Martínez-Hinojosa, JOHN EDISON Garcia-Herrera
2025 · DOI: 10.46793/adeletters.2025.4.2.3Total entropy and exergy efficiency of graphene oxide/nanodiamond hybrid nanofluids in a mini heat sink: experimental and particle swarm optimization predictions
L. Syam Sundar
2025 · DOI: 10.46793/adeletters.2025.4.2.2Reviews
Community Reviews
Version History
October 4, 2026 at 9:22 pm
October 2, 2026