Academic Journal
Q1Advances in Industrial and Manufacturing Engineering
About Advances in Industrial and Manufacturing Engineering
Advances in Industrial and Manufacturing Engineering is a scholarly journal published by Elsevier B.V.. SCImago 2025 lists it in Q1, with an SJR of 1.194 and H-index of 28.
Coverage: 2020-2025. Research categories: Engineering (miscellaneous) (Q1); Industrial and Manufacturing Engineering (Q1); Mechanical Engineering (Q1); Mechanics of Materials (Q1).
Open-access policies and author information
Reported in the official DOAJ public CSV snapshot (2026-09-01), downloaded 2026-10-03. Record updated 2026-04-27. This snapshot does not establish today’s listing status or fee quotation.
Publisher policy links recorded by DOAJ
- Aims and scope ↗
- Editorial board ↗
- Instructions for authors ↗
- Peer-review policy ↗
- Publication fees ↗
- Fee waivers ↗
- Licence terms ↗
- Copyright policy ↗
- Preservation policy ↗
Source: DOAJ journal record. Journal metadata is distributed by DOAJ under CC0. Confirm current fees, tax, eligibility and waiver terms with the publisher.
Source-backed journal facts
Topics in published research
Additive Manufacturing Materials and Processes; Additive Manufacturing and 3D Printing Technologies; Metal Forming Simulation Techniques; Metallurgy and Material Forming; Advanced machining processes and optimization; Welding Techniques and Residual Stresses.
OpenAlex classifies topics from published works. These topics are not the publisher’s official aims and scope.
Source: OpenAlex source record. Retrieved 2026-10-03. Source record updated 2026-10-02. OpenAlex metrics are different from SCImago metrics and the Clarivate Journal Impact Factor.
Journal Metrics
Quartile, SJR and the listed SCImago H-index use the 2025 imported SCImago dataset. A quartile may vary by subject category. Values without a source or reporting year are unverified historical entries. Verify the current Journal Impact Factor with Clarivate or the publisher before using it.
Aims & Scope
The publisher’s official aims and scope have not yet been verified for this profile. Use the journal website to check subject fit and accepted article types before submitting.
Recent Research Articles
Latest publications matched automatically by ISSN.
Cold metal fusion of AISI M2 steel: Process development, microstructure and suitability for complex parts
Johannes Vetter, Song Zhang, Simon Leupold, Maximilian Marschall et al.
2026-11 · DOI: 10.1016/j.aime.2026.100195A universal thermoelectric process-driven adhesion compensation system
Bastian Stiegeler, Phillip Stöcks-Morgan, Agnes Steinlehner, Christoph Hartmann et al.
2026-11 · DOI: 10.1016/j.aime.2026.100193SPH-FEM comparison of thermo-mechanical fields and defect formation in similar and dissimilar FSW complex joints
Salvatore Russo, Gianluca Buffa, Livan Fratini
2026-11 · DOI: 10.1016/j.aime.2026.100197Risk and condition informed decision support framework for end-of-life management of batteries
Shun Yang, Niraj Chauhan, Fazel Ansari, Sebastian Thiede et al.
2026-11 · DOI: 10.1016/j.aime.2026.100196From lab to plant: Data-driven modelling of an electroplating process
Marija Lindner, Rowena Duckstein, Christoph Herrmann
2026-11 · DOI: 10.1016/j.aime.2026.100194Scaling-up of electropolishing for Ni micro-injection mould tools: Enhanced performance and throughput in microfluidic device fabrication
Sana Zaki, Tianyu Guan, Yuguo Zhang, Minghzi Yu et al.
2026-05 · DOI: 10.1016/j.aime.2026.100187Counter pressure enhanced joint strength in spot friction melt bonding of titanium to aluminum
Sanjay C. Krishnamurthy, Sophie Ryelandt, Shavi Agrawal, Hosni Idrissi et al.
2026-05 · DOI: 10.1016/j.aime.2026.100191Towards in-process scrap reduction in aluminum extrusion: A multiscale investigation of charge-weld integrity
Eren Can Sariyarlioglu, Torgeir Welo
2026-05 · DOI: 10.1016/j.aime.2026.100183Self-adjustable tool center point of industrial robots based on neural network models
Denys Molochkov, Ruslan Kulykovskyi, Andrii Oliinyk, Serhii Shylo et al.
2026-05 · DOI: 10.1016/j.aime.2026.100189Beyond necking - Novel characterisation method to investigate the tensile response of sheet metals at elevated temperatures and constant true strain rates
David Naumann, Marion Merklein
2026-05 · DOI: 10.1016/j.aime.2026.100182Numerical model development and cutting force analysis for high-speed blanking of 22MnB5
E. Galiev, V. Psyk, H.J. Nallani, M. Linnemann et al.
2026-05 · DOI: 10.1016/j.aime.2026.100186Enhancing edge integrity of high-strength steels by high-speed blanking to achieve improved crashworthiness
Olaf Schrage, Roald Lingbeek, Priidu Peetsalu, Marlon Hahn et al.
2026-05 · DOI: 10.1016/j.aime.2026.100181Parametric assessment of injection dynamics for metal and polymer rapid-tooling using in-line process measurements and modelling of micro-injection moulding
Mert Gülçür, Olivia Griffiths, Adam Rich, Xiangyu Gao et al.
2026-05 · DOI: 10.1016/j.aime.2025.100179Joining-by-hydroforming of aluminum and poly(ether ether ketone) – A model experiment
Florian Weber, Ulrich A. Handge, Tanmoy Rakshit, Hamed Dardaei Joghan et al.
2026-05 · DOI: 10.1016/j.aime.2025.100180Novel hybrid bobbin tool friction stir welding of AA2219 with comparison to existing bobbin tool variants
Matteo Bernardi, Ting Chen, Mikael Guimaraes, Natã Lucas Beltrão da Silva et al.
2026-05 · DOI: 10.1016/j.aime.2026.100190Adaptive worker assignment for the flow shop scheduling with human diverse behaviors
Wushuang Wang, Shuyun Luo, Zhiyi Luo, Mengyuan Fang et al.
2026-05 · DOI: 10.1016/j.aime.2026.100188Data-driven framework for extracting steady-state deformation resistance from transient experimental data without inverse finite element analysis
Eiichi Ota, Minami Fujimura, Yasumoto Sato
2026-05 · DOI: 10.1016/j.aime.2025.100177Experimental–numerical investigation of force-controlled friction extrusion process via feedback-controlled simulation
Ahmed Elbossily, Zina Kallien, Lars Rath, Rupesh Chafle et al.
2026-05 · DOI: 10.1016/j.aime.2026.100184Combining topology optimization with targeted application of LMD additive manufacturing - A prospective LCA of laser-based aluminum processing
Christian Buschbeck, Patrick Meyer, Simon Dicks, Manuel Bickel et al.
2026-05 · DOI: 10.1016/j.aime.2026.100192Experimental and numerical analysis of compaction of fine powder bed under artificial high gravity for additive manufacturing
Zhazira Berkinova, Assem Sauirbayeva, Almaz Kenzheshov, Boris Golman et al.
2026-05 · DOI: 10.1016/j.aime.2025.100178Reviews
Community Reviews
Version History
October 4, 2026 at 8:55 pm
September 25, 2026