Academic Journal
Q2Applied Mechanics
About Applied Mechanics
Applied Mechanics is a scholarly journal published by Multidisciplinary Digital Publishing Institute (MDPI). SCImago 2025 lists it in Q2, with an SJR of 0.329 and H-index of 15.
Coverage: 2020-2025. Research categories: Engineering (miscellaneous) (Q2).
Verified field sources
- Journal Impact Factor: 1.8 — Official source; checked 2026-10-03. Journal Impact Factor and reporting year from the publisher imprint.
- Impact Factor year: 2025 — Official source; checked 2026-10-03. Journal Impact Factor and reporting year from the publisher imprint.
- Contact email: applmech@mdpi.com — Official source; checked 2026-10-03. Journal editorial office email published by MDPI; manuscript files use the submission system.
- Editor(s): Prof. Dr. Guoxin Xie (Associate Editor) — Official source; checked 2026-10-03. Associate Editor role listed by MDPI; this is not an Editor-in-Chief designation.
Open-access policies and author information
Reported in the official DOAJ public CSV snapshot (2026-09-01), downloaded 2026-10-03. Record updated 2024-04-10. This snapshot does not establish today’s listing status or fee quotation.
Publisher policy links recorded by DOAJ
- Aims and scope ↗
- Editorial board ↗
- Instructions for authors ↗
- Peer-review policy ↗
- Publication fees ↗
- Fee waivers ↗
- Licence terms ↗
- Copyright policy ↗
- Preservation policy ↗
Source: DOAJ journal record. Journal metadata is distributed by DOAJ under CC0. Confirm current fees, tax, eligibility and waiver terms with the publisher.
Source-backed journal facts
Topics in published research
Composite Structure Analysis and Optimization; Structural Health Monitoring Techniques; Vibration and Dynamic Analysis; Mechanical Behavior of Composites; Fatigue and fracture mechanics; High-Velocity Impact and Material Behavior.
OpenAlex classifies topics from published works. These topics are not the publisher’s official aims and scope.
Source: OpenAlex source record. Retrieved 2026-10-03. Source record updated 2026-10-02. OpenAlex metrics are different from SCImago metrics and the Clarivate Journal Impact Factor.
Journal Metrics
Quartile, SJR and the listed SCImago H-index use the 2025 imported SCImago dataset. A quartile may vary by subject category. Values without a source or reporting year are unverified historical entries. Verify the current Journal Impact Factor with Clarivate or the publisher before using it.
Aims & Scope
The publisher’s official aims and scope have not yet been verified for this profile. Use the journal website to check subject fit and accepted article types before submitting.
Recent Research Articles
Latest publications matched automatically by ISSN.
Parametric Numerical Investigation of Argon Transport in TPMS Porous Structures: Permeability and Outlet-Flow Uniformity
Jingru Cui, Jiaxin Zhao, Jiarong Mao, Fengshuo Zhang et al.
2026-09-30 · DOI: 10.3390/applmech7040080Load-Dependent Instrumented Indentation Test and Local Micromechanical Response near a Pore in Additively Manufactured IN718
Kirill Doronin, Alexander Ilyinsky, Aleksandr Umanskii, Artem Kondratev et al.
2026-09-24 · DOI: 10.3390/applmech7040079A Novel Meso-Scale Krouse Specimen for Bending Fatigue Characterization: Design Optimization and Experimental Validation
Md Bahar Uddin, Tyler Patterson, Sriram Praneeth Isanaka, Mohammad Masud Parvez et al.
2026-09-23 · DOI: 10.3390/applmech7040078Numerical Investigation of Confined Flow Around Circular and Square Obstacle Using the Multiple Relaxation Time Lattice Boltzmann
Zayneb Hmila, Mohieddine Ben Salah, Mabrouk Mosbahi, Ayoub Msaddak et al.
2026-09-21 · DOI: 10.3390/applmech7030077Finite Element-Assisted Random Forest Modeling for Development of Weld Schedules in Multi-Cycle Resistance End-Closure Welding of Zircaloy-4 Nuclear Fuel Elements
Vasudevan Muthukumaran, Dachepalli Sanyasi Setty, Bethavolu Venkata Arun Kiran
2026-09-18 · DOI: 10.3390/applmech7030076Structural Behavior of Post-Tensioned Concrete Beams with Predefined Camber and Accidental Deflection
Akar Hama Khdhir, Ghafur H. Ahmed
2026-09-15 · DOI: 10.3390/applmech7030075Enhancing Flexural Capacity of Cold-Formed Steel Beams with an Innovative Delta-Channel Section: Experiments and Validated FE Modeling
Rehan Farid Mustafa, Zahid Ahmad Siddiqi, Muhammad Ali Khan, Ali Ajwad et al.
2026-09-14 · DOI: 10.3390/applmech7030074Parametric Investigation on the Axial Compressive Performance of Grouted Connection Segments in Deep-Water Offshore Wind Jacket Structures
Yongxiang Gao, Anjie Huang, Shujie Zhao, Pu Xu et al.
2026-09-03 · DOI: 10.3390/applmech7030073Modal Analysis of an Additively Manufactured AlSi10Mg Thick-Walled Cylinder: Finite Element Simulation, Experimental Validation, and Non-Conservative Damping Characterization
Mazahir Hussain Shah, Shaheer Ul Hassan, Luděk Pešek
2026-08-21 · DOI: 10.3390/applmech7030072Axial–Torsional Path Dependence in an Elastoplastic Rod with a Multiply Connected Cross-Section
Rustam Abirov, Javlonbek Turdibekov
2026-08-19 · DOI: 10.3390/applmech7030071Mechanical and Microstructural Performance of Gypsum Composites Incorporating Treated Rice Husk and Recycled Gypsum
Matheus de Carvalho Dias, Rafael Beltrame, Flávia Costa de Mattos, Kelvin Techera Barbosa et al.
2026-08-17 · DOI: 10.3390/applmech7030070Novel Exact Solutions of the Duffing Equation: Stability Analysis and Application to Real Non-Linear Deformation Tests
Arseniy D. Berezner, Victor A. Fedorov, Nikolai S. Perov, Gregory V. Grigoriev et al.
2026-08-17 · DOI: 10.3390/applmech7030069Nonlinear Vibration Control of a Hybrid Rotor–Bearing System Using a State-Dependent Parameter PIP Controller
Hussein Sayed, Tamer A. El-Sayed
2026-08-13 · DOI: 10.3390/applmech7030068Hybrid Artificial Neural Network Long Short-Term Memory Framework for Predicting the Mechanical Behavior of Composite Materials
Alagulakshmi Rajendran, Ramalakshmi Ramar, Arumugaprabu Veerasimman, Sundarakannan Rajendran et al.
2026-08-13 · DOI: 10.3390/applmech7030067An Investigation of Thermo-Mechanical Finite Element Analysis Methodologies and a Demonstration on the Case of a Small-Scale Composite Cryogenic Hydrogen Tank
George Tzoumakis, George Lampeas
2026-08-11 · DOI: 10.3390/applmech7030066Comparative Study on Chip Reduction Coefficient and Morphology Evolution in Dry and Wet Machining of WP7V Steel with TiAlN-Coated Carbide Tool in Turning Process
Mahesh Kumar Gupta, Ratnakar Das
2026-08-05 · DOI: 10.3390/applmech7030065Functionally Graded Beams Resting on Foundations: A Review of Modelling, Analysis and Future Research Directions
Hareram Lohar, Anirban Mitra, Sarmila Sahoo
2026-08-05 · DOI: 10.3390/applmech7030064Development and Geometric Optimization of High-Performance Face Mills for Chatter Suppression
Shunqi Mei, Undrakh Mishigdorzhiyn, Valeriy Svinin, Andrey Irincheev et al.
2026-07-31 · DOI: 10.3390/applmech7030063Development of a Process for Optimising the Number of Springs in Modular Elastic Gears of Rack Rail Pinion Systems for Vibration Data-Based Railway System Safety
Hyung Suk Mun, Chan Woo Park
2026-07-31 · DOI: 10.3390/applmech7030062Comparison of the Biomechanical Behavior of a Soft Bankart Lesion on Shoulder Ligaments During Abduction: A Finite Element Study
Maria de la Luz Suarez-Hernandez, Guillermo Urriolagoitia-Sosa, Beatriz Romero-Ángeles, Francisco Javier Gallegos-Funes et al.
2026-07-27 · DOI: 10.3390/applmech7030061Reviews
Community Reviews
Version History
October 4, 2026 at 9:28 pm
October 2, 2026