Academic Journal
Q1Case Studies in Thermal Engineering
About Case Studies in Thermal Engineering
Case Studies in Thermal Engineering is a scholarly journal published by Elsevier Ltd. SCImago 2025 lists it in Q1, with an SJR of 1.081 and H-index of 101.
Coverage: 2013-2025. Research categories: Engineering (miscellaneous) (Q1); Fluid Flow and Transfer Processes (Q1).
Open-access policies and author information
Reported in the official DOAJ public CSV snapshot (2026-09-01), downloaded 2026-10-03. Record updated 2026-05-28. This snapshot does not establish today’s listing status or fee quotation.
Publisher policy links recorded by DOAJ
- Aims and scope ↗
- Editorial board ↗
- Instructions for authors ↗
- Peer-review policy ↗
- Publication fees ↗
- Fee waivers ↗
- Licence terms ↗
- Copyright policy ↗
- Preservation policy ↗
Source: DOAJ journal record. Journal metadata is distributed by DOAJ under CC0. Confirm current fees, tax, eligibility and waiver terms with the publisher.
Source-backed journal facts
Topics in published research
Nanofluid Flow and Heat Transfer; Heat Transfer Mechanisms; Heat Transfer and Optimization; Solar Thermal and Photovoltaic Systems; Fluid Dynamics and Turbulent Flows; Heat Transfer and Boiling Studies.
OpenAlex classifies topics from published works. These topics are not the publisher’s official aims and scope.
Source: OpenAlex source record. Retrieved 2026-10-03. Source record updated 2026-10-02. OpenAlex metrics are different from SCImago metrics and the Clarivate Journal Impact Factor.
Journal Metrics
Quartile, SJR and the listed SCImago H-index use the 2025 imported SCImago dataset. A quartile may vary by subject category. Values without a source or reporting year are unverified historical entries. Verify the current Journal Impact Factor with Clarivate or the publisher before using it.
Aims & Scope
The publisher’s official aims and scope have not yet been verified for this profile. Use the journal website to check subject fit and accepted article types before submitting.
Recent Research Articles
Latest publications matched automatically by ISSN.
Sensitivity analysis of the zone of influence (ZOI) in high energy arcing fault (HEAF) scenarios with respect to modeling assumption dependence
Hyo-Yeon Jang, Woo-Geun Kim, Cheol-Hong Hwang, Dae Il Kang et al.
2026-11 · DOI: 10.1016/j.csite.2026.108551Thermal analysis in the heat transfer coefficient measurement for NiTi tubular elastocaloric regenerators based on a lumped model
Siyuan Cheng, Kun Xing, Xueshi Li, Jiongjiong Zhang et al.
2026-11 · DOI: 10.1016/j.csite.2026.108582Use of helical finned heat sinks to enhance energy efficiency of photovoltaic panels and analysis with deep learning
S. Şengür, M.V. Han, M. Özel, G. Çakmak et al.
2026-11 · DOI: 10.1016/j.csite.2026.108573Credibility of CFD simulations for hydrogen jet-fire prediction: Combustion and radiation model assessment
Michał Mikke, Adam Krasuski
2026-11 · DOI: 10.1016/j.csite.2026.108537Exergy analysis and sensitivity study of a PV/T -air source heat pump coupled heating system under cold climates
Yuxin Zheng, Zizhen Huang, Yabin Jin, Wenhan Song et al.
2026-11 · DOI: 10.1016/j.csite.2026.108538Combustion mechanism of oil layer thermal resistance on interface heat transfer and combustion characteristics in n-heptane-water layer pool fires
Wenkang Zhang, Mi Li, Chenguang Yang, Dan Zhang et al.
2026-11 · DOI: 10.1016/j.csite.2026.108529Inverse estimation of dam thermodynamic parameters using a killing-strategy adaptive beluga whale optimization algorithm
Yuhang Li, Feng Wang, Wenjie Zhou, Chi Zhao et al.
2026-11 · DOI: 10.1016/j.csite.2026.108534Lean-burn stability and thermal efficiency of a high-compression SI engine using late direct water injection and multi-coil ignition
Zhiqiang Li, Chenxi Wang, Chuntao Liu, Jing Qin et al.
2026-11 · DOI: 10.1016/j.csite.2026.108591Numerical study on the design of heating source arrangements to enhance thermal ice coring performance
Dajun Zhao, Xuan Li, Xiaopeng Fan, Yong Chen et al.
2026-11 · DOI: 10.1016/j.csite.2026.108580An adaptive hybrid physics-informed neural network for thermal error modeling of machine tool spindles under time-varying operating conditions
Xinyuan Wei, Shen Hu, Zhuangzhu Guo, Honghan Ye et al.
2026-11 · DOI: 10.1016/j.csite.2026.108569Gas ingestion mechanism and unsteady flow characteristics of fish-mouth rim seals in an axial gas turbine
Zepeng Gai, Jianping Hu, Yu Xu, Yaguo Lyu et al.
2026-11 · DOI: 10.1016/j.csite.2026.108561Evaluating the effectiveness of multi-layer fin structure on the performance and temperature uniformity of a thermoelectric generator system on a stationary diesel engine
Minh Quang Pham, Luc Van Nguyen, Thong Duc Hong
2026-11 · DOI: 10.1016/j.csite.2026.108536Research on thermodynamic performance of a gas-steam combined cycle with rotating detonation combustion
Lei Qi, Haonan Yin, Haoshu Ding, Xiaojuan Niu et al.
2026-11 · DOI: 10.1016/j.csite.2026.108585Performance analysis of a novel hybrid power system coupling concentrated solar-driven biomass gasification with SOFC-GT
Haocheng Wang, Chen Yang, Zhenzhong Li, Qiang Zhang et al.
2026-11 · DOI: 10.1016/j.csite.2026.108543Case study of intelligent thermal performance optimization for hybrid battery thermal management systems through CFD-driven surrogate modeling and multi-criteria decision analysis
Yunyan Shang, Ali Alkhafaji, Muneera Altayeb, As'ad Alizadeh et al.
2026-11 · DOI: 10.1016/j.csite.2026.108540Microscale model of a Titania-silver nano-detergent flow in woven fabric pores: Experimental properties and real laundering features
Saeed Dinarvand, Ehsan Kalantari, Mohammadmahdi Eslami
2026-11 · DOI: 10.1016/j.csite.2026.108564Multi-constraint optimization of riser design for low-pressure casting of a gearbox housing
Dinghao Guo, Han Lin, Chao Zhou, Mingjun Yang et al.
2026-11 · DOI: 10.1016/j.csite.2026.108587Passive radiative cooling of non-sky-facing surfaces: Downward-facing and double-sided radiative cooling
Nora A. Wu, YunLe (Han) Wang, Patricia DePalma, Samuel F. Jimenez et al.
2026-11 · DOI: 10.1016/j.csite.2026.108531Physics-informed neural network for modeling coupled fluid flow and heat transport in a geothermal doublet system
Cuiting Qi, Yanguang Liu, Yonghong Hao, Hongbin Zhan et al.
2026-11 · DOI: 10.1016/j.csite.2026.108594Thermo-hydraulic performance of DLP-fabricated TPMS inserts: Numerical and experimental case study
Muhtadin Muhtadin, Sena Abraham Irsyad, Jung Ting-Tsai
2026-11 · DOI: 10.1016/j.csite.2026.108590Reviews
Community Reviews
Version History
October 4, 2026 at 8:57 pm
September 25, 2026