Academic Journal
Q2Experimental Heat Transfer
About Experimental Heat Transfer
Experimental Heat Transfer is a scholarly journal published by Taylor and Francis Ltd.. SCImago 2025 lists it in Q2, with an SJR of 0.592 and H-index of 46.
Coverage: 1987, 1989-2026. Research categories: Control and Systems Engineering (Q2); Electrical and Electronic Engineering (Q2); Instrumentation (Q2).
Verified field sources
- Journal Impact Factor: 3.1 — Official source; checked 2026-10-03. Publisher-reported Journal Impact Factor and year from Taylor & Francis About this journal information.
- Impact Factor year: 2025 — Official source; checked 2026-10-03. Publisher-reported Journal Impact Factor and year from Taylor & Francis About this journal information.
Source-backed journal facts
Topics in published research
Heat Transfer and Optimization; Heat Transfer Mechanisms; Heat Transfer and Boiling Studies; Fluid Dynamics and Turbulent Flows; Nanofluid Flow and Heat Transfer; Combustion and flame dynamics.
OpenAlex classifies topics from published works. These topics are not the publisher’s official aims and scope.
Source: OpenAlex source record. Retrieved 2026-10-03. Source record updated 2026-10-02. OpenAlex metrics are different from SCImago metrics and the Clarivate Journal Impact Factor.
Journal Metrics
Quartile, SJR and the listed SCImago H-index use the 2025 imported SCImago dataset. A quartile may vary by subject category. Values without a source or reporting year are unverified historical entries. Verify the current Journal Impact Factor with Clarivate or the publisher before using it.
Aims & Scope
The publisher’s official aims and scope have not yet been verified for this profile. Use the journal website to check subject fit and accepted article types before submitting.
Recent Research Articles
Latest publications matched automatically by ISSN.
Local heat transfer augmentation in a square channel with delta wing vortex generators
Anandkumar S. Malipatil, Basavaraj Angadi, R. J. Talapati, V. V. Nagathan et al.
2026-09-21 · DOI: 10.1080/08916152.2026.2729068Role of the relative limb width ratio of multi trapezoidal rib roughness having gaps in the limbs to enhance heat transfer for a solar thermal collector
Rinku Kumar, Prashant Saini, Tabish Alam
2026-09-15 · DOI: 10.1080/08916152.2026.2732001Experimental investigation of heating – cooling boiling hysteresis on CNT – Cu microporous surfaces: effects of CNT composition and sintering temperature
Jin Soo Kim, Sung Joo Hong
2026-09-02 · DOI: 10.1080/08916152.2026.2708645Thermohydraulic evaluation of a spiral triangular solar air heater incorporating wire mesh screen layers: an experimental study
Seyed Mahdi Taheri Mousavi, Selcuk Inac
2026-09-02 · DOI: 10.1080/08916152.2026.2724817Study on flow and convective heat transfer of spiral flow channels in stacked porous woven structure heat sinks
Ying Han, Pengxiang Wang, Tong Sha, Zhongjie Lu et al.
2026-08-31 · DOI: 10.1080/08916152.2026.2724813Investigation of oscillation parameters on molten pool dynamic behavior and microstructural evolution in laser welding of steel plates
Gang Wu, Wenhao Huang, Binbin Zhang, Guizhong Li et al.
2026-07-28 · DOI: 10.1080/08916152.2026.2708648Thermal performances of a heat pipe with a flexible helical adiabatic section
Jiale Huang, Junjie Li, Yuting Liu, Junguang Liu et al.
2026-07-23 · DOI: 10.1080/08916152.2026.2708635Entropy generation and second-law performance of ethylene glycol–water mixtures in a heat exchanger tube with conical wire insert
Fatma Oflaz
2026-06-20 · DOI: 10.1080/08916152.2026.2692676Enrichment of thermal properties and featuring of alumina/copper/water/EG nanofluid with heat exchanger featured micro-channel: performance evaluation
Madaminov Sanjarbek Maxmudjon Ugli, Toshit Jain, Vemuri Sailaja, Aashim Dhawan et al.
2026-06-10 · DOI: 10.1080/08916152.2026.2685507Correction
2026-09-19 · DOI: 10.1080/08916152.2026.2675160Experimental study on temperature oscillation and distribution characteristics of pulsating heat pipes at three specific inclination angles
Fumin Shang, Haoran Xu, Shilong Fan, Jianhong Liu et al.
2026-09-19 · DOI: 10.1080/08916152.2026.2667988Optimization of pyramidal solar still operation using floating absorbers, mirrors, and nanomaterial-enhanced PCM: experimental analysis and economic evaluation
Habib Ben Bacha, A.S. Abdullah, Sulaiman Almoatham, Suha A. Mohammed et al.
2026-09-19 · DOI: 10.1080/08916152.2026.2666794Comprehensive analysis of thermo-hydraulic performance for finless flat tube heat exchangers: a modeling and experimental approach
Peng Gao, Yi Liu, Qi Dong, Fu-Feng Zhao et al.
2026-09-19 · DOI: 10.1080/08916152.2026.2662648Thermal performance of open-cell copper metal foam heat sinks with different configurations and pore densities for electronics cooling
Suha Shather Ismaeel, Wail Sami Sarsam
2026-09-19 · DOI: 10.1080/08916152.2026.2658484Prototype of multi-thermoelectric unit with open- and closed-loop air channel designs: heat transfer and energy analysis
Amr Elbrashy, Youssef Ebada, Maher Rashad
2026-09-19 · DOI: 10.1080/08916152.2026.2658488Investigation of graphite coating for heat exchanger surface protection against calcium carbonate fouling deposition and corrosion
Kaleemullah Shaikh, Rab Nawaz, Samr Ul Hasnain, Salim Newaz Kazi et al.
2026-09-19 · DOI: 10.1080/08916152.2026.2649731Magnetically controlled ferrofluid flow in an eight-start corrugated tube: experimental assessment of coupled heat transfer enhancement and frictional penalty
Ibrahim Ali M. Eljetlawi, Selcuk Selimli, Abdulmunaem Mohamed Abdullah Shaneb, Khaled Mohamed Ashnaaf Abajja et al.
2026-09-19 · DOI: 10.1080/08916152.2026.2649735Investigation on hysteresis effect of enhanced subcooled flow boiling by surface modification in horizontal narrow channel
Shikun Liu, Hitoshi Asano, Katsumi Sugimoto
2026-09-19 · DOI: 10.1080/08916152.2026.2633425Experimental thermal behavior of sandy gravel stratum during artificial ground freezing-thawing process under seepage flow
Yunxi Han, Yupeng Shen, Chenyu Pei, Jingfu Guo et al.
2026-09-19 · DOI: 10.1080/08916152.2026.2630687Thermal optimization of 3D-Printed mini-channel coolers: insights from experiments and simulations
Kamel Chadi, Nourredine Belghar, Issam Fourar, Farouk Laidoudi et al.
2026-02-12 · DOI: 10.1080/08916152.2026.2616398Reviews
Community Reviews
Version History
October 4, 2026 at 9:13 pm
October 2, 2026