Academic Journal
Q3High Temperature Materials and Processes
About High Temperature Materials and Processes
High Temperature Materials and Processes is a scholarly journal published by Walter de Gruyter GmbH. SCImago 2025 lists it in Q3, with an SJR of 0.379 and H-index of 34.
Coverage: 1984, 1986-2026. Research categories: Condensed Matter Physics (Q3); Materials Science (miscellaneous) (Q3); Mechanics of Materials (Q3); Physical and Theoretical Chemistry (Q3).
Open-access policies and author information
Reported in the official DOAJ public CSV snapshot (2026-09-01), downloaded 2026-10-03. Record updated 2026-07-24. This snapshot does not establish today’s listing status or fee quotation.
Publisher policy links recorded by DOAJ
- Aims and scope ↗
- Editorial board ↗
- Instructions for authors ↗
- Peer-review policy ↗
- Publication fees ↗
- Fee waivers ↗
- Licence terms ↗
- Copyright policy ↗
- Preservation policy ↗
Source: DOAJ journal record. Journal metadata is distributed by DOAJ under CC0. Confirm current fees, tax, eligibility and waiver terms with the publisher.
Source-backed journal facts
Topics in published research
Metallurgical Processes and Thermodynamics; Microstructure and Mechanical Properties of Steels; High Temperature Alloys and Creep; Intermetallics and Advanced Alloy Properties; Aluminum Alloy Microstructure Properties; High-Temperature Coating Behaviors.
OpenAlex classifies topics from published works. These topics are not the publisher’s official aims and scope.
Source: OpenAlex source record. Retrieved 2026-10-03. Source record updated 2026-10-02. OpenAlex metrics are different from SCImago metrics and the Clarivate Journal Impact Factor.
Journal Metrics
Quartile, SJR and the listed SCImago H-index use the 2025 imported SCImago dataset. A quartile may vary by subject category. Values without a source or reporting year are unverified historical entries. Verify the current Journal Impact Factor with Clarivate or the publisher before using it.
Aims & Scope
The publisher’s official aims and scope have not yet been verified for this profile. Use the journal website to check subject fit and accepted article types before submitting.
Recent Research Articles
Latest publications matched automatically by ISSN.
Numerical simulation and optimization of gas quenching cooling temperature field of sintered NdFeB vacuum sintering furnace
Song Yang, Lei Zhou, Xinyu Bi, Xiaoning Shi et al.
2026-01-23 · DOI: 10.1515/htmp-2025-0106Effect of Mg on inclusions, microstructure, and mechanical properties of hot work die steel melted under pressurization
Yafeng Wang, Yang Li, Yuexu Liu, Tuo Wang et al.
2026-01-23 · DOI: 10.1515/htmp-2025-0118Effect of Nb on the microstructure and mechanical properties of a hot-rolled dual-phase steel produced by TMCP
Peimao Fu, Rui Wang, Zhijie Yan, Shihai Wang et al.
2026-01-23 · DOI: 10.1515/htmp-2025-0100Experimental investigation on the mechanical behavior of Al-7068 hybrid composite with SiC and Si 3 N 4 reinforcements
Prem Prakash Pandit, Rajendra Kumar Shukla, Premanand S. Chauhan, Rajan Kumar et al.
2026-01-23 · DOI: 10.1515/htmp-2025-0116Numerical investigation of radiative Bödewadt flow of a hybrid nanofluid over a radially stretching disk saturated in a porous medium
Subhajit Panda, Mohammed Shamshuddin, Sulyman Olakunle Salawu, Prakash Kumar Ratha et al.
2026-01-23 · DOI: 10.1515/htmp-2025-0132Upcycling polyvinyl chloride (PVC) using iron oxide for fabrication of carbon encapsulated iron (Fe@C) sub-micron particles and FeCl 2
Lan Hong, Lin-hai Ye, Tai-lin Li, Heng-yi Li et al.
2026-01-23 · DOI: 10.1515/htmp-2025-0112Key effect of preparing coal water slurry from Na + /Ca 2+ in wastewater: slurrying & co-combustion process
Yulong Duan, Changji Wang, Shixuan Liu
2026-01-23 · DOI: 10.1515/htmp-2025-0109First-principles study on high-temperature thermodynamic and mechanical properties of intermetallic phases in Mg–RE alloys (RE = Tb, Dy, Ho)
Xu Yang, Mengqin He, Baicheng Xi, Qian Ma et al.
2026-01-23 · DOI: 10.1515/htmp-2025-0110Effect of heat treatment on microstructural evolution of alloy 625 with different initial microstructures
Xiaoping Wang
2026-01-23 · DOI: 10.1515/htmp-2025-0119Effect of pulse-on duration in micro-EDC of high-entropy alloy with graphene powder addition
Rashi Tyagi, Nitesh Kumar, Kuldeep Saxena, Sunil Kumar Tiwari et al.
2026-01-23 · DOI: 10.1515/htmp-2025-0120High-temperature transport characteristics of magneto-micropolar nanofluid flow with microorganisms and stimulus energies: numerical insights
Munaza Chaudhry, Muhammad Abdul Basit, Muhammad Imran, Tayyaba Akhtar et al.
2026-01-23 · DOI: 10.1515/htmp-2025-0111Microstructure, texture and magnetic properties of Fe-4.5 wt% Si electrical steel fabricated by double-pass rolling method
Feng Guo, Ruiyang Liang, Junzhe Hu, Menghao Liu et al.
2026-01-23 · DOI: 10.1515/htmp-2025-0108Study on temperature rise prediction of ZnO varistors under multiple lightning strikes based on BP neural network and microscopic
Chunying Li, Chunlong Zhang, Qing Lv
2026-01-23 · DOI: 10.1515/htmp-2025-0107Thermodynamic analysis of gas conversion and carbon deposition in the zero reforming process of coke oven gas
Wen-Lin Zheng, Ya-Na Qie, Na Li, Xin-Dong Wang et al.
2026-01-23 · DOI: 10.1515/htmp-2025-0088Study the wear resistance and corrosion of Ni–P/ PTFE composite coatings prepared by electrodeposition method
Zainab Wetwet
2026-01-23 · DOI: 10.1515/htmp-2025-0076Study on mechanical properties and damage mechanism of 3D printed carbon fiber reinforced composite laminates
Meiqing Wan, Xuejun Zhou, Zengxi Sun, Xin Chen et al.
2026-01-23 · DOI: 10.1515/htmp-2025-0127Quantifying stability in earthen plasters: pull-off adhesion metrics and data physicalization mapping
Ziying Wang, Korakot Jairak
2026-01-23 · DOI: 10.1515/htmp-2025-0131Effect of energy density on cracking of ZGH451 superalloy by laser powder bed fusion
Yin Wu, Hao Zhang, Yuping Zhu, Zixiang Qiu et al.
2026-01-23 · DOI: 10.1515/htmp-2025-0113The influence of parameters on the response and the optimisation of metal-ceramic composite coatings by HVOF spraying
Yingjiao Chen, Mingder Jean
2026-01-23 · DOI: 10.1515/htmp-2025-0124Hot deformation behavior and hot processing map of GH2132 alloy
YuKang Yuan, YaNan Zeng, JunGuo Li, YunFei Zhang et al.
2026-01-23 · DOI: 10.1515/htmp-2025-0101Reviews
Community Reviews
Version History
October 2, 2026 at 9:45 pm
October 2, 2026