Academic Journal
Q1Journal of Advanced Concrete Technology
About Journal of Advanced Concrete Technology
Journal of Advanced Concrete Technology is a scholarly journal published by Japan Concrete Institute. SCImago 2025 lists it in Q1, with an SJR of 0.769 and H-index of 72.
Coverage: 2003-2026. Research categories: Building and Construction (Q1); Materials Science (miscellaneous) (Q2).
Source-backed journal facts
Topics in published research
Concrete and Cement Materials Research; Innovative concrete reinforcement materials; Structural Behavior of Reinforced Concrete; Concrete Corrosion and Durability; Concrete Properties and Behavior; Structural Response to Dynamic Loads.
OpenAlex classifies topics from published works. These topics are not the publisher’s official aims and scope.
Source: OpenAlex source record. Retrieved 2026-10-03. Source record updated 2026-10-02. OpenAlex metrics are different from SCImago metrics and the Clarivate Journal Impact Factor.
Journal Metrics
Quartile, SJR and the listed SCImago H-index use the 2025 imported SCImago dataset. A quartile may vary by subject category. Values without a source or reporting year are unverified historical entries. Verify the current Journal Impact Factor with Clarivate or the publisher before using it.
Aims & Scope
The publisher’s official aims and scope have not yet been verified for this profile. Use the journal website to check subject fit and accepted article types before submitting.
Recent Research Articles
Latest publications matched automatically by ISSN.
Flexural Behavior of 3D-Printed Mortar Beams Reinforced with Continuous Fibers Extruded Simultaneously with Mortar
Yuto Kitamura, Kazunari Sasaki, Yoshikazu Ishizeki, Kenichiro Nakarai et al.
2026-10-03 · DOI: 10.3151/jact.24.613Frost Resistance of Self-compacting Concrete with Varying Recycled Coarse Aggregate Contents in a Typical High-altitude Cold Region
Jingbin Zhang, Zixuan Liu, Dejian Shen, Tengyun Lang et al.
2026-09-26 · DOI: 10.3151/jact.24.599Study on the Static and Dynamic Mechanical Behavior of Ultra-High Performance Concrete with Ferrochrome Slag
Zhidan Rong, Hao Hu, Hanliang OuYang
2026-09-25 · DOI: 10.3151/jact.24.586Shear Strength Evaluation of Ultra-High-Performance Fiber Reinforced Cementitious Composite Beams with Compressive Strengths up to 300 N/mm<sup>2</sup>
Kouta Takizawa, Ryohei Yanagida, Naoto Okanoue
2026-09-16 · DOI: 10.3151/jact.24.566Pore Solution of Stoichiometric MKP Cement Paste: Study of Composition Using Different Extraction Protocols and Thermodynamic Modelling
Gabriel Poras, Céline Cau Dit Coumes, Pascal Antonucci, Céline Cannes et al.
2026-08-28 · DOI: 10.3151/jact.24.551Evaluation of Shear Resistance Mechanisms in Fiber-Reinforced RC Beams Using DIC
Kanae Abe, Ryohei Yanagida, Shuto Nakaya, Shin-ichi Igarashi et al.
2026-08-22 · DOI: 10.3151/jact.24.517Study on the Drying Shrinkage of Shotcrete Considering the Effects of Pore Structures and Aggregates Microcracks
Jiahe Wang, Yu Gao, Yanbino Tan, Siming Tian et al.
2026-08-22 · DOI: 10.3151/jact.24.537Curing Technologies for Cement-Based Materials: Mechanisms, Performance and Future Trends
Yang Liu, Sheng Qiang
2026-08-22 · DOI: 10.3151/jact.24.525Experimental Study on Freeze-Thaw Mechanical Performance Deterioration and Microcrack Evolution of Cement Matrix under Different Freezing Temperatures
Junwei Zhang, Zhe Yang
2026-08-18 · DOI: 10.3151/jact.24.501Additive Effect of Cation Exchanger on the Leaching of <sup>137</sup>Cs from Cement-solidified Cs-enriched Waste
Tsuneki Ichikawa, Takahito Yasukochi, Kazuo Yamada, Yasumasa Tojo et al.
2026-08-14 · DOI: 10.3151/jact.24.478Study on the Damage Mechanism of Concrete after Freeze-Thaw Cycles
Wenqiu Du, Zhiwu Zhu, Wurong Jia, Lijun Zhang et al.
2026-08-14 · DOI: 10.3151/jact.24.486Effect of MgO Grades and Admixtures on the Rheological Behavior and Reactivity of MgO-Metakaolin Blends
Youssef El Bitouri, Jacques Jabbour, Joe Maalouf, Gwenn Le Saoût et al.
2026-08-06 · DOI: 10.3151/jact.24.468Evolution of Microstructure-Rheology-Mechanical Properties: A Multiscale Analysis of Steel Slag Cementitious Composites for 3D Printing
Yu Zhao, Guanghai Shen, Lingli Zhu, Yadong Bian et al.
2026-08-05 · DOI: 10.3151/jact.24.451Effect of Electric Arc Furnace Slag Fine Aggregate on Compressive Strength of High-Strength Mortar
Yushi Kato, Satoshi Watanabe, Keiki Yamamoto, Diancheng Geng et al.
2026-07-28 · DOI: 10.3151/jact.24.430Shear Capacity Evaluation of RC Beams with FRP Stirrups Based on Beam and Arch Actions
Devin Gunawan, Kazumasa Okubo, Naoki Sogabe, Mitsuyasu Iwanami et al.
2026-07-28 · DOI: 10.3151/jact.24.441Volume Stability and Mechanical Property of Hardened Cement Paste under the First Drying: Effects of Water-to-Cement Ratio and Cement Type
Shota Umeki, Ryo Kurihara, Piyapong Suwanmaneechot, Hiroki Sugimoto et al.
2026-07-22 · DOI: 10.3151/jact.24.395Design and Load Management Method for Restraint Jigs for Considering Applied Load in Concrete Freeze–Thaw Tests
Haruka Ikadatsu, Hidehiko Ogata, Masahiro Hyodo, Akio Ishigami et al.
2026-07-18 · DOI: 10.3151/jact.24.417Performance Evolution of Carbonated Alkali-activated Slag Paste Under Marine Environment
Jaures Syntyche Ndzila, Zhengxian Yang, Kang Li
2026-07-04 · DOI: 10.3151/jact.24.382Effect of Sodium Orthophosphate on Rheology and Hydration of MgO/Nesquehonite Cement
Clélia Bouchaud-Deliot, Frank Winnefeld, Barbara Lothenbach
2026-06-30 · DOI: 10.3151/jact.24.369Mesoscale Fracture Evolution in Concrete: Insights from GPU-Accelerated 3D Discrete Element Simulations with Realistic Aggregate Morphologies
Fengchen Li, Hongze Li, Chun Feng, Jili Feng et al.
2026-06-24 · DOI: 10.3151/jact.24.355Reviews
Community Reviews
Version History
October 4, 2026 at 9:06 pm
October 2, 2026