Academic Journal
Q3Letters on Materials
About Letters on Materials
Letters on Materials is a scholarly journal published by Institute for Metals Superplasticity Problems of Russian Academy of Sciences. SCImago 2025 lists it in Q3, with an SJR of 0.25 and H-index of 18.
Coverage: 2014-2025. Research categories: Materials Science (miscellaneous) (Q3).
Source-backed journal facts
Topics in published research
Microstructure and mechanical properties; Material Properties and Applications; Intermetallics and Advanced Alloy Properties; Advanced materials and composites; Material Properties and Failure Mechanisms; Metallurgy and Material Forming.
OpenAlex classifies topics from published works. These topics are not the publisher’s official aims and scope.
Source: OpenAlex source record. Retrieved 2026-10-03. Source record updated 2026-10-02. OpenAlex metrics are different from SCImago metrics and the Clarivate Journal Impact Factor.
Journal Metrics
Quartile, SJR and the listed SCImago H-index use the 2025 imported SCImago dataset. A quartile may vary by subject category. Values without a source or reporting year are unverified historical entries. Verify the current Journal Impact Factor with Clarivate or the publisher before using it.
Aims & Scope
The publisher’s official aims and scope have not yet been verified for this profile. Use the journal website to check subject fit and accepted article types before submitting.
Recent Research Articles
Latest publications matched automatically by ISSN.
Effect of synthesis temperature on the formation of nickel-copper composite nanoparticles
Irina Isaeva, Galina Ostaeva, Ekaterina Eliseeva, Andrey Golovin et al.
2023-06 · DOI: 10.22226/2410-3535-2023-2-149-152Nanocomposite thin-film structures based on a polyelectrolyte complex of chitosan and chitosan succinamide with SWCNT
Renat Salikhov, Rufina Zilberg, Elena Bulysheva, Anastasia Ostaltsova et al.
2023-06 · DOI: 10.22226/2410-3535-2023-2-132-137On selection of advanced compositions of flame resistant magnesium alloys
Sergei Zasypkin, Dmitrii Merson, Aleksandr Brilevsky, Alexey Irtegov et al.
2023-06 · DOI: 10.22226/2410-3535-2023-2-104-108Effect of high-dense electropulsing with different energies on the structure and strength of nickel cryorolled to different strains
Michael Markushev, Irshat Valeev, Elena Avtokratova, Rafis Ilyasov et al.
2023-06 · DOI: 10.22226/2410-3535-2023-2-126-131Investigation of the effect of compacting mode parameters of a carbon-aluminum wire preform on the strength of the produced compact
Bulat Atanov, Sergei Galyshev, Nail Zaripov, Ulfat Shayakhmetov et al.
2023-06 · DOI: 10.22226/2410-3535-2023-2-115-120The effect of oxygen-free MgF2 matrix on the physical properties of (CoFeZr)х(MgF2)100−х nanocomposites
Oleg Stognei, Tatyana Tregubova, Ilia Tregubov
2023-06 · DOI: 10.22226/2410-3535-2023-2-109-114Localized shear as a quasi-plastic mechanism of momentum transfer in liquids
Oleg Naimark, Sergey Uvarov, Irina Bannikova, Denis Efremov et al.
2023-06 · DOI: 10.22226/2410-3535-2023-2-93-97Elastic properties of diamane
Polina Polyakova, Leysan Galiakhmetova, Ramil Murzaev, Dmitry Lisovenko et al.
2023-06 · DOI: 10.22226/2410-3535-2023-2-171-176Tribological behavior of the electron beam additive manufactured Ti6Al4V-Cu alloy
Aleksandra Nikolaeva, Anna Zykova, Andrey Chumaevskii, Andrey Vorontsov et al.
2023-06 · DOI: 10.22226/2410-3535-2023-2-158-163Thermoelectric properties of CuO-LiCoO2‑La0.7Sr0.3MnO3 composition materials
Yuri Kabirov, Mark Belokobylsky, Vladislav Popov, Andrey Letovaltsev et al.
2023-06 · DOI: 10.22226/2410-3535-2023-2-153-157Structure of Ni44.4Mn36.2Sn14.9Cu4.5 alloy applicable for thermomechanical treatment
Ruslan Gaifullin, Kirill Kirilyuk, Ilfat Safarov, Irek Musabirov et al.
2023-06 · DOI: 10.22226/2410-3535-2023-2-164-170Structure and strength of Al-Mn-Cu-Zr-Cr-Fe ALTEC alloy after radial-shear rolling
Anastasiia Petrova, Dmitriy Rasposienko, Vladimir Astafyev, Anna Yakovleva et al.
2023-06 · DOI: 10.22226/2410-3535-2023-2-177-182Evolution of an approach to the modeling of zirconium hydrides morphology based on Monte-Carlo method in 3D representation
Tiemur Aliev, Mikhail Kolesnik
2023-06 · DOI: 10.22226/2410-3535-2023-2-143-148Technological properties of sheet titanium alloys VT6
Rinat Safiullin, Svetlana Malysheva, Ruslan Khazhaliev, Artur Safiullin et al.
2023-06 · DOI: 10.22226/2410-3535-2023-2-98-103Wear resistance of Fe66Cr10Nb5B19 detonation coatings under dry linearly reciprocating conditions and nanoscratch test
Ivanna Kuchumova, Vladislav Shikalov, Igor Batraev, Artem Filippov et al.
2023-06 · DOI: 10.22226/2410-3535-2023-2-138-142On the coefficient of compositional stability of nitrogen for high-nitrogen alloys of the Fe-Cr-Mn-Mo-N system, obtained by the SHS method under nitrogen pressure
Maksim Konovalov, Vladimir Lad’yanov, Marina Mokrushina, Vladislav Karev et al.
2023-06 · DOI: 10.22226/2410-3535-2023-2-121-125Signs of the presence of an ordered phase in the Cu-5.9 at.% Pd alloy after its long-term annealing at a moderate temperature
Oksana Novikova, Alina Kostina, Elena Volkova, Yuriy Salamatov et al.
2023-03 · DOI: 10.22226/2410-3535-2023-1-3-8Optical and dielectric properties of nanosized ceramics Bi2Mg1-xСrxTa2O9.5-Δ with pyrochlore structure
Evgeniy Serebryakov, Alena Shpynova, Roman Korolev, Nikolay Sekushin et al.
2023-03 · DOI: 10.22226/2410-3535-2023-1-50-55Physico-chemical properties of silicon-carbon films obtained by electrochemical deposition
Inna Bogush, Nina Plugotarenko, Tatiana Myasoedova, Vitaliy Ptashnik et al.
2023-03 · DOI: 10.22226/2410-3535-2023-1-39-44Reviews
Community Reviews
Version History
October 4, 2026 at 9:34 pm
October 2, 2026