Academic Journal
Q3Material and Mechanical Engineering Technology
About Material and Mechanical Engineering Technology
Material and Mechanical Engineering Technology is a scholarly journal published by Abylkas Saginov Karaganda Technical University. SCImago 2025 lists it in Q3, with an SJR of 0.218 and H-index of 6.
Coverage: 2019-2025. Research categories: Mechanical Engineering (Q3); Metals and Alloys (Q3); Materials Science (miscellaneous) (Q4); Mechanics of Materials (Q4).
Source-backed journal facts
Topics in published research
Industrial Engineering and Technologies; Engineering Technology and Methodologies; Material Properties and Applications; Engineering and Environmental Studies; Mechanical Systems and Engineering; Advanced Theoretical and Applied Studies in Material Sciences and Geometry.
OpenAlex classifies topics from published works. These topics are not the publisher’s official aims and scope.
Source: OpenAlex source record. Retrieved 2026-10-03. Source record updated 2026-10-02. OpenAlex metrics are different from SCImago metrics and the Clarivate Journal Impact Factor.
Journal Metrics
Quartile, SJR and the listed SCImago H-index use the 2025 imported SCImago dataset. A quartile may vary by subject category. Values without a source or reporting year are unverified historical entries. Verify the current Journal Impact Factor with Clarivate or the publisher before using it.
Aims & Scope
The publisher’s official aims and scope have not yet been verified for this profile. Use the journal website to check subject fit and accepted article types before submitting.
Recent Research Articles
Latest publications matched automatically by ISSN.
Natural Radioactivity of Solid Fuels and Ash-And-Slag Materials in the Context of their Environmental Impact
Dmitri Yuryevich Pak, Yuri Nikolayevivh Pak, Diana Andreevna Ibragimova, Аnar Yulayevna Tebayeva et al.
2026-07-01 · DOI: 10.52209/2706-977x_2026_2_55Formation of Wear-Resistant Coatings by Surfacing in a Shielding Gas Environment
Madina Turlybekovna Kapkenova, Riza Gabdyssalyk, Sarken Dzhulgazyvna Kapayeva, Jacek Cieślik et al.
2026-07-01 · DOI: 10.52209/2706-977x_2026_2_17A Methodology for Optimizing Material Flows in Mechanical Engineering Enterprises Based on Big Data Technologies
Gulnara Santayevna Zhetessova, Olga Mikhailovna Zharkevich, Irina Nikolaevna Khrustaleva, Murat Galiaskarovich Kozhanov et al.
2026-07-01 · DOI: 10.52209/2706-977x_2026_2_25Optimization of Vibration Treatment and Modification Parameters for 40CrNi3MoV Steel Based on Mathematical Modeling
Аssem Аdilkhanovna Tuganbayeva, Aristotеl Zeinullinovich Issagulov, Sania Kaskataevna Arinova, Ardak Mukhamedievna Dostayeva et al.
2026-07-01 · DOI: 10.52209/2706-977x_2026_2_70Quantitative Activation-Energy and Boundary-Layer Analysis of Pressure-Dependent Hydrogen and Nitrogen Desorption in Vacuum-Refined Low-Carbon Steel
Imamverdi Ali Behbudlu
2026-07-01 · DOI: 10.52209/2706-977x_2026_2_110The Influence of Cutting Depth on Surface Finish and Dimensional Accuracy
Musurmon Avlaqulovich Juraev, Karibek Tagaevich Sherov, Oybek Valijonovich Tuyboyov, Sayat Mamyrbaevich Kardassinov et al.
2026-07-01 · DOI: 10.52209/2706-977x_2026_2_61Dynamics of the Vibration Process of a Pumping unit Taking into Account the Elastic and Dissipative Properties of the Elements of Support Devices
Adilbek Mustafin, Nursultan Sadykov, Gulnara Abdullina, Galiya Akhmedyanova et al.
2026-07-01 · DOI: 10.52209/2706-977x_2026_2_3Modeling of Design Stresses Caused by Vehicular Loading on Cement Concrete Pavement for Conducting Model Tests
Rauan Ermagambetovich Lukpanov, Lyailya Temirzhanovna Kabdyrova, Murat Karacasu, Serik Beisengalievich Yenkebayev et al.
2026-07-01 · DOI: 10.52209/2706-977x_2026_2_102Study of Wear Resistance of Antifriction Materials for Bushings of Lever-Hinge Mechanism of Lifting Installation Brake System
Oxana Amangeldyevna Nurzhanova, Sergey Borisovich Boiko, Alexandra Sergeevna Berg, Adelia Erzhanovna Mukhitova et al.
2026-07-01 · DOI: 10.52209/2706-977x_2026_2_78Review of Previous Studies: From Classical Coagulation Theory to Practical Ultrasonic Purification of Exhaust Gases
Adil Kadyrov, Rustem Sakhapov, Aliya Kukesheva
2026-07-01 · DOI: 10.52209/2706-977x_2026_2_86Mathematical Modeling of the Economic Effectiveness of Repurposed Automotive Engine Swap Kits for Diesel Generator Units
Damir Sapargalievich Aimukhanov, Ali Javanshirovich Mekhtiyev, Lukasz Wargula, Nurbolat Sakenovich Sembayev et al.
2026-07-01 · DOI: 10.52209/2706-977x_2026_2_115Analysis of Limit Loads and 3D Modeling of Removable Equipment for Rail Transporters
Oyum Temirgalievich Balabayev, Valentin Feliksovich Mikhailov, Aidana Donenbaykyzy Kassymzhanova, Dias Madatovich Beisembayev et al.
2026-07-01 · DOI: 10.52209/2706-977x_2026_2_10Testing the Grip Strength of Individual Fingers of the Hand in Relation to the Grip Strength of the Whole Hand
Emilia Bąk, Karolina Czajka, Adrianna Dudziak, Amelia Fabiańska et al.
2026-07-01 · DOI: 10.52209/2706-977x_2026_2_35Fault Diagnosis Using Limited Vibration Dataset with Hyperparameter Optimization
Musaab Zarog, Sulaiman Al-Adawi, Mohammed Al-Nabhani, Isehaq Al-Aufi et al.
2026-07-01 · DOI: 10.52209/2706-977x_2026_2_46Strength Assessment of a New Adaptive Tooling Design
Oxana Nurzhanova, Olga Zharkevich, Adilkhan Bakenov, Alexandra Berg et al.
2026-03-31 · DOI: 10.52209/2706-977x_2026_1_23Mоdeling and Analysis оf Interactiоns in the Rоtor–Bearing–Housing System under Variable Loads
Shakhnosa Makhmudova
2026-03-31 · DOI: 10.52209/2706-977x_2026_1_31Justification of the Effectiveness of Developing and Using a Mobile Overpass
Aidar Zhumabekov, Rustem Sakhapov, Shinpolat Suyunbayev, Akbope Karsakova et al.
2026-03-31 · DOI: 10.52209/2706-977x_2026_1_3A Review of Modeling and Preparation of Functionally Graded Materials for Bone Tissue Engineering
Zahraa Abbas Oda, Nabaa Sattar Radhi
2026-03-31 · DOI: 10.52209/2706-977x_2026_1_62Studying Radiation-Radon Safety of Building Materials and Residential Buildings of the Karaganda Region
Dmitri Pak, Yuri Pak, Diana Ibragimova, Vladimir Matonin et al.
2026-03-31 · DOI: 10.52209/2706-977x_2026_1_37Determination and Optimization of Working Parameters of a Sheep House Feeding Device Based on the Discrete Element Method
Zhihao Fan, Baoqin Wen, Olga Reshetnikova, Jingbin Li et al.
2026-03-31 · DOI: 10.52209/2706-977x_2026_1_98Reviews
Community Reviews
Version History
October 4, 2026 at 9:36 pm
October 2, 2026