Academic Journal
Q3Open Engineering
About Open Engineering
Open Engineering is a scholarly journal published by Walter de Gruyter GmbH. SCImago 2025 lists it in Q3, with an SJR of 0.337 and H-index of 43.
Coverage: 2015-2026. Research categories: Aerospace Engineering (Q3); Civil and Structural Engineering (Q3); Electrical and Electronic Engineering (Q3); Environmental Engineering (Q3); Materials Science (miscellaneous) (Q3); Mechanical Engineering (Q3).
Open-access policies and author information
Reported in the official DOAJ public CSV snapshot (2026-09-01), downloaded 2026-10-03. Record updated 2026-07-24. This snapshot does not establish today’s listing status or fee quotation.
Publisher policy links recorded by DOAJ
- Aims and scope ↗
- Editorial board ↗
- Instructions for authors ↗
- Peer-review policy ↗
- Publication fees ↗
- Fee waivers ↗
- Licence terms ↗
- Copyright policy ↗
- Preservation policy ↗
Source: DOAJ journal record. Journal metadata is distributed by DOAJ under CC0. Confirm current fees, tax, eligibility and waiver terms with the publisher.
Source-backed journal facts
Topics in published research
Innovative concrete reinforcement materials; Structural Behavior of Reinforced Concrete; Concrete and Cement Materials Research; Transport and Logistics Innovations; Structural Load-Bearing Analysis; Vehicle emissions and performance.
OpenAlex classifies topics from published works. These topics are not the publisher’s official aims and scope.
Source: OpenAlex source record. Retrieved 2026-10-03. Source record updated 2026-10-02. OpenAlex metrics are different from SCImago metrics and the Clarivate Journal Impact Factor.
Journal Metrics
Quartile, SJR and the listed SCImago H-index use the 2025 imported SCImago dataset. A quartile may vary by subject category. Values without a source or reporting year are unverified historical entries. Verify the current Journal Impact Factor with Clarivate or the publisher before using it.
Aims & Scope
The publisher’s official aims and scope have not yet been verified for this profile. Use the journal website to check subject fit and accepted article types before submitting.
Recent Research Articles
Latest publications matched automatically by ISSN.
Microorganism and nanoparticle concentration implications on nanofluid flow: application of alteration of oil reservoir wettability by nanoparticles
Taghreed H. Al-Arabi, Nasser S. Elgazery, Asmaa F. Elelamy
2026-01-23 · DOI: 10.1515/eng-2025-0165Investigating the influence of adding different sugar ratios on cement paste hydration and behavior
Asmaa Mahdi Ali, Mustafa Abdul Mahdi Yaseen, Fatimah N. Al-Husseinawi, Zainab Al-Khafaji et al.
2026-01-23 · DOI: 10.1515/eng-2025-0136A methodology for parallel loading of distribution transformers with different impedance voltages
Ayman Agha
2026-01-23 · DOI: 10.1515/eng-2025-0163Observability analysis of navigation systems: lie Derivative approach
Trong Su Chu, Phi Minh Nguyen
2026-01-23 · DOI: 10.1515/eng-2025-0185New research on ternary hybrid nanofluid flow across a surface with the influence of thermal radiation using semi-numerical simulation
Ali Rehman, Mustafa Inc, Krishna Sudarmozhi
2026-01-23 · DOI: 10.1515/eng-2025-0157Flexural strengthening of reinforced concrete beams using external steel elements with different end conditions
Bilal Khan, Akhtar Gul, Chady El Hachem, Khan Shahzada et al.
2026-01-23 · DOI: 10.1515/eng-2025-0161A systematic review on rejuvenators in flexible asphalt pavement: types, content, methods, performance, and applications
Munder Bilema, Choon Wah Yuen, Zubair Ahmed Memon
2026-01-23 · DOI: 10.1515/eng-2025-0151Experimental investigation and evaluation of NR-BirdNet: a noise-robust bird call analysis deep learning model
Bhubneshwar Sharma, Ajay Kumar, Randhir Singh, Parveen Kumar Lehana et al.
2026-01-23 · DOI: 10.1515/eng-2025-0170Verification of resistance and usability of historic masonry arch bridge
Peter Koteš, Matúš Farbák, Martin Vavruš, František Bahleda et al.
2026-01-23 · DOI: 10.1515/eng-2025-0191Optimizing mechanical component design with population-based metaheuristics
Warisa Nakkiew, Sumanut Suriyanoi, Wasawat Nakkiew, Nuttachat Wisittipanit et al.
2026-01-23 · DOI: 10.1515/eng-2025-0166Bibliometric review of research trends in energy harvesting from flow-induced vibrations
Subekti Subekti, Achmad Syaifudin, Jean Mario Valentino, Yohanes Pringeten Dilianto Sembiring et al.
2026-01-23 · DOI: 10.1515/eng-2025-0180The investigation of optimum material for small and medium-speed vehicle brake discs: a study of heat flux
Suhrab Sheybani, Ahmad Farzad Faqiri, Farhad Gulistani
2026-01-23 · DOI: 10.1515/eng-2025-0169Numerical modeling and forecasting of water overflow through dams on the Syrdarya river
Perizat Omarova, Aisulu Ataniyazova, Maksat Galiyev, Timur Merembayev et al.
2026-01-23 · DOI: 10.1515/eng-2025-0152Post-peak compressive response and energy absorption of ternary pozzolanic mortar reinforced with PVA fibers
Luma Ahmed Aday
2026-01-23 · DOI: 10.1515/eng-2025-0154Backstepping adaptive sliding mode control based on a time-varying barrier function for the suppressing stick-slip vibrations
Dina Hameed Tuama, Shibly Ahmed Al-Samarraie, Mohamad Hazwan Mohd Ghazali, Wan Rahiman et al.
2026-01-23 · DOI: 10.1515/eng-2025-0144Investigation of the influence of dielectric material properties on a magnetically actuated MEMS-based THz metasurface
Anil Babu Badisa, Przemyslaw Lopato, Michal Herbko, Barbara Szymanik et al.
2026-01-23 · DOI: 10.1515/eng-2025-0181Atomistic insight into molecular structure and hydronium ion transport in proton exchange membranes of hydrogen fuel cells: effect of solvent hydrophobicity
Gaukhar Kabdrakhimova, Dastan Yergaliyev, Aisulu Abuova, Fatima Abuova et al.
2026-01-23 · DOI: 10.1515/eng-2025-0160Pressurized solid liquid extraction of red yeast rice and the extract application as a natural dye of cotton fabrics
Margono Margono, Muhammad Abdul Jamil, Ghafara Ramadhan
2026-01-23 · DOI: 10.1515/eng-2025-0168Dynamic concept drift detection using an integrated machine learning model with error-based Page-Hinkley Test for enhanced predictive accuracy in adhesive manufacturing process
Ugochukwu Nwachukwu, Daniel O. Aikhuele, Shahryar Sorooshian
2026-01-23 · DOI: 10.1515/eng-2025-0158Force control of series elastic actuators using sliding mode control theory
Ahmed Kadhiam Jaliel, Mohsin N. Hamzah, Shibly A. Al-Samarraie
2026-01-23 · DOI: 10.1515/eng-2025-0147Reviews
Community Reviews
Version History
October 2, 2026 at 9:53 pm
October 2, 2026