Academic Journal
Q2Progress in Engineering Science
About Progress in Engineering Science
Progress in Engineering Science is a scholarly journal published by Elsevier B.V.. SCImago 2025 lists it in Q2, with an SJR of 0.539 and H-index of 8.
Coverage: 2024-2026. Research categories: Building and Construction (Q2); Civil and Structural Engineering (Q2); Engineering (miscellaneous) (Q2); Mechanical Engineering (Q2).
Source-backed journal facts
Topics in published research
Concrete and Cement Materials Research; Innovative concrete reinforcement materials; Natural Fiber Reinforced Composites; Microbial Applications in Construction Materials; Structural Behavior of Reinforced Concrete; Geotechnical Engineering and Soil Stabilization.
OpenAlex classifies topics from published works. These topics are not the publisher’s official aims and scope.
Reported open-access list prices
2,580.00 USD; 2,410.00 EUR; 2,070.00 GBP; 320,000.00 JPY
APC list prices reported by OpenAlex, which obtains this information from DOAJ. Confirm current charges, taxes, waivers and eligibility with the publisher; this is not a fee quotation.
Source: OpenAlex source record. Retrieved 2026-10-03. Source record updated 2026-10-02. OpenAlex metrics are different from SCImago metrics and the Clarivate Journal Impact Factor.
Journal Metrics
Quartile, SJR and the listed SCImago H-index use the 2025 imported SCImago dataset. A quartile may vary by subject category. Values without a source or reporting year are unverified historical entries. Verify the current Journal Impact Factor with Clarivate or the publisher before using it.
Aims & Scope
The publisher’s official aims and scope have not yet been verified for this profile. Use the journal website to check subject fit and accepted article types before submitting.
Recent Research Articles
Latest publications matched automatically by ISSN.
State-aware anomaly detection for arch dam monitoring using thermo–hydraulic Koopman modelling
Thalosang Tshireletso, Pilate Moyo
2026-12 · DOI: 10.1016/j.pes.2026.100367Experimental and data-driven analysis of microwave-induced bending in 4D-printed PLA/Iron-filled PLA laminates for deployable structures
Partha Surajit Bhuyan, Loknath Newar, Bhaskarjit Borah, Aditya Chauhan et al.
2026-12 · DOI: 10.1016/j.pes.2026.100383Effect of spray distance in D-gun sprayed Cr3C2–NiCr coatings on DSS 2205 in acidic environments
Roshan Kuruvila, Mebin T. Kuruvila, Manu Harilal, S. Thirumalai Kumaran et al.
2026-12 · DOI: 10.1016/j.pes.2026.100378Uplift performance of horizontal plate anchor in two-layered soil
Ashutosh Kumar, Nitesh Nag, Awdhesh Kumar Choudhary, Anil Kumar Choudhary et al.
2026-12 · DOI: 10.1016/j.pes.2026.100374ViT-LungClass (VLC): Threshold-based slice pruning and Vision Transformer classification for efficient lung CT analysis
Lavina Jean Crasta, Alwyn Roshan Pais
2026-12 · DOI: 10.1016/j.pes.2026.100370Analytical and numerical investigation of the performance of thin-walled energy absorbers with combined sections
S. Jafari, F. Kholoosi
2026-12 · DOI: 10.1016/j.pes.2026.100388Triple-band double-T monopole antenna: Design and experimental validation
Ismail Maaroufi, Asmae EL Beqal, Hanane Nasraoui, Mohammed Serbouti et al.
2026-12 · DOI: 10.1016/j.pes.2026.100377Optimizing the use of oyster shell ash as a cement replacement material in the production of high-strength concrete
Bunyamin Bunyamin, Taufiq Saidi, Sugiarto Sugiarto, Muttaqin Hasan et al.
2026-12 · DOI: 10.1016/j.pes.2026.100372Reinforcement-assisted friction stir welding of dissimilar metals: Mechanisms, interfaces, and performance
Uday M. Basheer Al-Naib
2026-12 · DOI: 10.1016/j.pes.2026.100373Agricultural-residue biochar as high-performance fillers in bituminous concrete
S. Preethi, H.T. Avinash
2026-12 · DOI: 10.1016/j.pes.2026.100375Impact of sesame fibers on the physical and thermo-mechanical properties of unfired adobe bricks: Energy and economic assessment at the building scale under a hot Moroccan climate
Youness Azalam, Mohammed Benfars, Abdelmounaim Alioui, El Maati Bendada et al.
2026-12 · DOI: 10.1016/j.pes.2026.100380Influence of lattice topology and loading orientation on the anisotropic mechanical performance of additively manufactured cellular structures
A. Manmadhachary, Phanindra Bogu, Raju Vemoori
2026-12 · DOI: 10.1016/j.pes.2026.100384Geometry-driven performance enhancement of a Bi₂Te₂.₇₀Se₀.₃₀ thermoelectric cooler
Akram Kharmouch, Md. Kamrul Hasan, Hicham Bouali, Ahteshamul Haque et al.
2026-12 · DOI: 10.1016/j.pes.2026.100385Flexural, shear and flexural–shear behaviour of fiber-reinforced prestressed concrete: A critical review
Komala Nandaraju, Ramalingam Mourougane
2026-12 · DOI: 10.1016/j.pes.2026.100382Thermodynamic affinity, diffusion behavior, and dispersion evolution of dry-process SBS modifier in asphalt: Effects of temperature and dosage
Junfeng Sun, Haitao Zhang, Ao Sun, Guangyuan Wu et al.
2026-12 · DOI: 10.1016/j.pes.2026.100386Advances in multicore optical fiber sensors for modern applications
Prachi Palta, Aastha Palta
2026-09 · DOI: 10.1016/j.pes.2026.100343Discrete element analysis of interlayer behavior and strengthening mechanisms in double-layer asphalt mixtures under continuous and intermittent paving
Junfeng Sun, Haitao Zhang, Mingyang Yu, Guangyuan Wu et al.
2026-09 · DOI: 10.1016/j.pes.2026.100350A multi-sensor fusion framework for early crack detection in rotating shafts based on wavelet energy entropy and adaptive extended Kalman filtering
Dhanraj Burragalla, Vasantha Kumar Kandukuri
2026-09 · DOI: 10.1016/j.pes.2026.100337Identification and assessment of food safety risks in the pre-made dish supply chain under uncertain environments
Chunhong Wang
2026-09 · DOI: 10.1016/j.pes.2026.100320Wind Farm Unmanned Aerial Vehicle Autonomous Inspection System Based on Improved RRT Algorithm and Target Detection
Wei Luo, Hao Li, Wenzhe Yang, Zhenshan Cao et al.
2026-09 · DOI: 10.1016/j.pes.2026.100387Reviews
Community Reviews
Version History
October 4, 2026 at 9:16 pm
October 2, 2026