513 Mbit/s Visible Light Communications Link Based on DMT-Modulation of a White LED
📄 Abstract
We report a visible-light wireless point-to-point communication link operating at 513 Mbit/s gross transmission rate (net Mbit/s). The bit-error ratio of the uncoded data was smaller than for an illumination level of lx. The link was based on a commercial thin-film high-power phosphorescent white LED, an avalanche photo diode, and off-line signal processing of discrete multitone signals. Quadrature-amplitude modulation, bit- and power-loading, as well as symmetrical clipping were successfully employed in pushing the gross transmission rate beyond 500 Mbit/s. Adaptation of the clipping level increased the data rate only by 2%, while simulations predicted an enhancement of 20%. Obstacles towards higher data rates as well as potential remedies are discussed. We predicted that data rates of over 1 Gbit/s can be achieved with the same setup and under the same experimental conditions if these obstacles are overcome.
📤 Share this page
Found this useful? Share it with your network.