Academic Journal
Q3Revue des Composites et des Materiaux Avances
About Revue des Composites et des Materiaux Avances
Revue des Composites et des Materiaux Avances is a scholarly journal published by International Information and Engineering Technology Association. SCImago 2025 lists it in Q3, with an SJR of 0.252 and H-index of 15.
Coverage: 2012-2025. Research categories: Materials Science (miscellaneous) (Q3).
Source-backed journal facts
Topics in published research
Mechanical Behavior of Composites; Natural Fiber Reinforced Composites; Innovations in Concrete and Construction Materials; Textile materials and evaluations; Innovative concrete reinforcement materials; Additive Manufacturing and 3D Printing Technologies.
OpenAlex classifies topics from published works. These topics are not the publisher’s official aims and scope.
Source: OpenAlex source record. Retrieved 2026-10-03. Source record updated 2026-10-02. OpenAlex metrics are different from SCImago metrics and the Clarivate Journal Impact Factor.
Journal Metrics
Quartile, SJR and the listed SCImago H-index use the 2025 imported SCImago dataset. A quartile may vary by subject category. Values without a source or reporting year are unverified historical entries. Verify the current Journal Impact Factor with Clarivate or the publisher before using it.
Aims & Scope
The publisher’s official aims and scope have not yet been verified for this profile. Use the journal website to check subject fit and accepted article types before submitting.
Recent Research Articles
Latest publications matched automatically by ISSN.
Linear and Nonlinear Optical Properties of PMMA–PS/TeO₂ Nanocomposites for Slab Waveguide Applications
Montaser A. Mahdi, Khalid Al-Ammar, Zaid A. Hasan
2026-08-31 · DOI: 10.18280/rcma.360402Influence of Weathering Conditions on the Mechanical Properties of PMMA Composite Based Natural Nano Powder
Hajir Mohammed Ali, Alaa Raad Hussein, Monis Abdulmanan Abdullah, Anwar Luay Khaleel et al.
2026-08-31 · DOI: 10.18280/rcma.360414Piezoelectric Materials for Autonomous Internet of Things and Edge Intelligence: From Fundamental Physics to Self-Powered Intelligent Systems
Bachar Mourched, Mariam Abdallah
2026-08-31 · DOI: 10.18280/rcma.360415Effect of Octadecanethiol Treatment on Wettability, Fracture Morphology, and Mechanical Properties of Soybean Hull-Derived Cellulose/Epoxy Composites
Arya Mahendra Sakti, Dewi Puspitasari, Andita Nataria Fitri Ganda, Femiana Gapsari et al.
2026-08-31 · DOI: 10.18280/rcma.360412Multi-Layer Composite Pipes: An Investigation into the Effects of Fiber Orientation and Lamination on Stability and Stress Distribution
Hameed Obaid Radhi, Sheyan Abdallhh Rashied
2026-08-31 · DOI: 10.18280/rcma.360406Comparative Review of Polymer-Modified Asphalt Mixtures: Effects of Styrene-Butadiene-Styrene, Ethylene-Vinyl Acetate, and Low-Density Polyethylene on Pavement Performance
Saadoon K. Hussein, Mohammad Hosein Dehnad
2026-08-31 · DOI: 10.18280/rcma.360407Study of the Optical and Electrical Properties of the Co-Sensitization of Red Dragon Fruit and Japanese Papaya Leaves as a Sensitizer of Photoanode
Putu Suardana, Ni Luh Arpiwi, Ida Ayu Dwi Giriantari, Hery Suyanto et al.
2026-08-31 · DOI: 10.18280/rcma.360404Strength vs. Ductility: A Comparative Microstructural Analysis of Stir-Cast Commercially Pure Aluminum Alloy AA1100 Reinforced with Mg and Al₂O₃
Ismail Ibrahim Marhoon, Marwah Ali Harb, Ahmed Hashim Kareem, Samir Ali Amin et al.
2026-08-31 · DOI: 10.18280/rcma.360408Fabrication and Characterization of Conductive AuNPs-loaded PCL/PU Electrospun Scaffolds for Cardiac Tissue Engineering Potential
Saja A. Moosa, Tiba Y. Jasim, Hadeel A. Abbas, Akram R. Jabur et al.
2026-08-31 · DOI: 10.18280/rcma.360420Optical and Dispersion Characteristics of PVA-PAAM/Sb₂O₃-CuO Hybrid Nanocomposite Films for Optoelectronic Applications
Farah Jabber Hamood, Zainab Qassim Mohamed, Fouad Shakir Hashim, Ahmed Ismail Abdelamir et al.
2026-08-31 · DOI: 10.18280/rcma.360413Optimizing Waste Glass Powder Content for Chloride-Exposed Reinforced Concrete: Mechanical Performance, Microstructural Characterization, and Corrosion Assessment
Aula Jamal Hasan Alansare, Agusril Syamsir, Nor Hazwani Nor Khalid
2026-08-31 · DOI: 10.18280/rcma.360419Research Trends and Emerging Themes in Phase Change Materials for Sustainable Building Thermal Energy Storage: A Bibliometric Analysis
Khaled Almazam, Anthonia Oluwatosin Adediran, Samuel-Soma M. Ajibade, Faizah Mohammed Bashir et al.
2026-08-31 · DOI: 10.18280/rcma.360409Synthesis and Optical Characteristics of PMMA Polymeric Films Doped with Methylene Blue Dye for Laser Applications
Rajaa M. Abdullah, Dalal N. Alhilfi, Numan Sleem Hashim, Hussain A. Badran et al.
2026-08-31 · DOI: 10.18280/rcma.360410Assessing the Contribution of Particle Size Scale and Colloidal Nano-Dense Silica Fume to Cement Mortar Performance
Mohammed J. Kadhim, Sally M. Abd, Mohammad Z. Yousif
2026-08-31 · DOI: 10.18280/rcma.360405Effect of Flux Particle Size and Binary Flux Mixtures on Weld Bead Geometry and Mechanical Properties in Submerged Arc Welding of Liquefied Petroleum Gas Cylinders: An Experimental Study
Khouloud Baali, Salah Madani, Abdallah Bourih, Ahmed Boussaha et al.
2026-08-31 · DOI: 10.18280/rcma.360411Microstructural and Mechanical Behavior of Tungsten Inert Gas-Welded API 5L/316L Pipe Joints Using ER309L Filler Metal
Abbas Nasser Hasein, Haibat Lafta
2026-08-31 · DOI: 10.18280/rcma.360418Compressive Behavior of Geopolymer Concrete-Filled Steel Tube Columns with Recycled Aggregate
Mohamed A. Abdullah, Wissam D. Salman, Amna N. Abd, Ahmed S. Hakeem et al.
2026-08-31 · DOI: 10.18280/rcma.360416Performance of Concrete Reinforced with Recycled Drink Can Fibers
Chiraz Kechkar, Ghania Nigri, Fatima Zohra Benamara, Houria Hebhoub et al.
2026-08-31 · DOI: 10.18280/rcma.360401A Review of Organic, Inorganic, and Eutectics Phase Change Materials for Cooling Photovoltaic Solar Panels
Abdullah H. Fliah, Mahmoud Sh. Mahmoud
2026-08-31 · DOI: 10.18280/rcma.360403Reviews
Community Reviews
Version History
October 4, 2026 at 9:33 pm
October 2, 2026