Academic Journal
Q3Surface Review and Letters
About Surface Review and Letters
Surface Review and Letters is a scholarly journal published by World Scientific Publishing Co. Pte Ltd. SCImago 2025 lists it in Q3, with an SJR of 0.233 and H-index of 53.
Coverage: 1996-2026. Research categories: Materials Chemistry (Q3); Surfaces, Coatings and Films (Q3); Condensed Matter Physics (Q4); Surfaces and Interfaces (Q4).
Source-backed journal facts
Topics in published research
Advanced Chemical Physics Studies; Metal and Thin Film Mechanics; Surface and Thin Film Phenomena; Electron and X-Ray Spectroscopy Techniques; Semiconductor materials and devices; ZnO doping and properties.
OpenAlex classifies topics from published works. These topics are not the publisher’s official aims and scope.
Source: OpenAlex source record. Retrieved 2026-10-03. Source record updated 2026-10-02. OpenAlex metrics are different from SCImago metrics and the Clarivate Journal Impact Factor.
Journal Metrics
Quartile, SJR and the listed SCImago H-index use the 2025 imported SCImago dataset. A quartile may vary by subject category. Values without a source or reporting year are unverified historical entries. Verify the current Journal Impact Factor with Clarivate or the publisher before using it.
Aims & Scope
The publisher’s official aims and scope have not yet been verified for this profile. Use the journal website to check subject fit and accepted article types before submitting.
Recent Research Articles
Latest publications matched automatically by ISSN.
Machine Learning-Based Modeling and Multi-Criteria Optimization of Wire-EDM Parameters
Rajeev Ranjan, Subhajit Bhattacharya, Manoj Kundu
2026-10-02 · DOI: 10.1142/s0218625x26501131Predictive Modelling of Laser Hardening in EN25 Steel using Analytical Heat Source Theory, Response Surface Methodology, and Comparative Gaussian Process–Support Vector Regression
Dinesh Babu Purushothaman, Niranjan Rajkumar, Arjunsrivatsan Balaji, Nagarjun Navaneethakannan et al.
2026-10-02 · DOI: 10.1142/s0218625x26501143EDM-INDUCED AREAL SURFACE TOPOGRAPHY AND RECAST-LAYER CHARACTERISTICS OF Cu–Ni–Si–Cr ALLOY AMPCOLOY 944
VIPIN VIJAYAN, KAIPRAPPADY KUNCHU SAJU
2026-09-30 · DOI: 10.1142/s0218625x26420023EXPERIMENTAL INVESTIGATION AND OPTIMIZATION OF MACHINABILITY ASPECTS OF ALUMINUM ALLOY AA7068 IN DRY TURNING USING DEEP LEARNING TECHNIQUE
ANSHUMAN DAS, B. PRABHA, SMITA PADHAN, NALIN SOMANI et al.
2026-09-30 · DOI: 10.1142/s0218625x26500976Analysis of Tool Erosion and Circularity in ECDM Using TGRA
Manpreet Singh, Parvesh Antil, Sahil Grover, Sarbjit Singh et al.
2026-09-30 · DOI: 10.1142/s0218625x2650112xA UBIQUITIFORM MODEL FOR THERMO-ELASTOPLASTIC NORMAL CONTACT STIFFNESS AT MICRO/MACRO SCALES IN THERMAL MACHINERY
YAN FENG, HUIFANG LI, JUAN XIA, GENG YANG et al.
2026-09-30 · DOI: 10.1142/s0218625x26501003A Review on the EDM process and its impact on Biomedical materials
Antu Talukder, Aman Bansal, Sachin Kalsi, Prakash Mohan et al.
2026-09-26 · DOI: 10.1142/s0218625x26300066Sustainable EDM Technique for High-Performance Titanium Alloys: The Case of Ti-5553
Sandeep Kumar Pradhan, Rahul, Md. Ehtesham Hasan
2026-09-26 · DOI: 10.1142/s0218625x26501118Enhancing Machining Performance: A Comprehensive Review of Coatings for Cutting Tool Inserts
Venkatesh Ramamoorthi, Saravana Priya SanthanaKrishnan, Prabhakaran Ramachandran, Anbumalar Veerapathiran et al.
2026-09-26 · DOI: 10.1142/s0218625x26300054Effect of UPT process on surface hardness and residual stress of parts cut
Yaodong Jin, Anna Raducanu
2026-09-22 · DOI: 10.1142/s0218625x26501106Electrochemical Evaluation of Corrosion Inhibitors on the Corrosion Behavior of 13CrMo44 Steel in NH 4 Cl Solution
Qusay Abdulsattar Mohammed, Muhammad Jawad, A. S. Prakaash, Chirag G. Makvana et al.
2026-09-22 · DOI: 10.1142/s0218625x2650109xDEGRADATION BEHAVIOR AND DRUG RELEASE SYNCHRONICITY OF BIODEGRADABLE POLYLACTIC ACID HYDROXYACETIC ACID COPOLYMER (PLGA) SURFACE DRUG-LOADED COATING
WEI ZHANG, YANHUA ZHANG, QIANG ZHANG
2026-09-22 · DOI: 10.1142/s0218625x26500964Nano ceramic coating with photonic crystal structure: a new method for dynamic color display in ceramic art
Wenli Lian
2026-09-22 · DOI: 10.1142/s0218625x26501088ROLE OF THERMO-CHEMICALLY MODIFIED MILLET HUSK SILICON NITRIDE CERAMIC AND BAGASSE MICROFIBER ON LOAD-BEARING PROPERTIES OF POLYESTER COMPOSITE REBARS
N. DEVENDRAN, T. S. LAKSHMI, V. R RAJI, M.K. MUNIYASAMY et al.
2026-09-19 · DOI: 10.1142/s0218625x26500988EXPERIMENTAL INVESTIGATION ON TOOL ELECTRODE WEAR RATE AND RADIAL OVERCUT IN ELECTRIC DISCHARGE DRILLING OF NiTiCu SHAPE MEMORY ALLOY
HARI OM, SHANKAR SINGH
2026-09-19 · DOI: 10.1142/s0218625x26500940Improved EDM Precision with Advanced Ensemble Machine Learning Prediction for INC-625 Superalloy
L. Balaji, M. Karthikeyan, N. Babu
2026-09-17 · DOI: 10.1142/s0218625x26501076Surface Topographical Analysis of Diametric and Kerf Behavior in Micro-Hole Piercing on Inconel 718 using AWJM
V. Balasubramaniam, A. Kadirvel, A. Krishna Prakash, M. Karthikeyan et al.
2026-09-17 · DOI: 10.1142/s0218625x26501064Design and Analysis of Microwave Pressure Sensor Using Metamaterial Absorber
Atipriya Sharma, Harbinder Singh, Sunil Kumar, Amrindra Pal et al.
2026-09-17 · DOI: 10.1142/s0218625x26501027Assessment Of Fatigue Crack Propagation Life Based On Physics-Informed Neural Networks Under Ensemble Learning In Hydrogen Environments
Debiao Meng, Muhammad Umar Khan, Huaxi Wu, Lu-Kai Song et al.
2026-09-17 · DOI: 10.1142/s0218625x26430018Experimental Investigation for improving the productivity, hole geometry and machined surface in EDM drilling of Ti-6Al-4V using desirability function approach (DFA)
Md. Tasnim Arif, Amit Sharma
2026-09-17 · DOI: 10.1142/s0218625x26501015Reviews
Community Reviews
Version History
October 4, 2026 at 9:35 pm
October 2, 2026